Tietoa meistä

EKWB EK-KIT L360 (R2.0)

0Ei varastossa  
( 3-4 päivän toimitusaika)
Hinta 335.60  € 
EK - KIT L360 water cooling kit is a basic kit dedicated to all users who wants an easy, high quality and efficient water cooling system.

The supplied EK-Supremacy MX water block is a really good water block, which provides both high performance and flow for pennies! EK-CoolStream PE 360 radiator fits in most cabinets due to its smaller radiator size, and provides super efficient cooling of the system, and it is optimized for low-noise fan. EK - KIT L360 is driven by EK-XRES 100 DDC MX 3.1 PWM, which is the perfect match for the kit with its small size, high performance and super low noise!

The system comes with EK-ACF Fitting 10/16mm Nickel (6 pcs) and uses the super soft EK-TUBE ZMT Matte Black tubing, so you can safely and easily connect your devices without the hassle of a rigid hose or bend marks.
EK - KIT L360 fills and empties easily via EK-XRES 100 DDC MX 3.1 PWM applied directly to the pump.

You obviously also receive a fan with this kit - it's the amazing EK-Vardar F3-120 1850rpm.

With EK - KIT L360 you get a kit of quality parts that not only gives you super performance at an affordable price but also are easy to assemble and maintain!

EK - KIT L360 fits most modern CPU sockets and can be installed in 99% of all cabinets without modification!

If you can assemble and disassemble a computer, you can EASILY install this kit with the supplied installation guide, it's easy as pie.
The kit contains everything you need for installation, except of distilled water which must be purchased separately. 1L is enough for this kit.


Intel 1156, 1155, 1151, 1150, 2011, 2066

* If you are unsure of compatibility please contact us.

This kit contains:
- Universal CPU water block: EK-Supremacy MX (incl. mounting- & thermal material)
- Radiator: EK-CoolStream PE 360 (Tripplel)
- Radiator size: 400 x 130 x 38mm (L x W x H)
- Radiator fan: EK-Vardar F3-120 1850rpm (3pcs)
- Water pump/reservoir unit: EK-XRES 100 DDC MX 3.1 PWM
- Tubing: EK-Tube ZMT Matte Black 15,9/9,5mm (2 meters)
- Compression fittings: EK-ACF Fitting 10/16mm Nickel (6 pcs)
- Coolant concentrate: EK-CryoFuel Clear Concentrate (100mL; for 1L of coolant)
- Additional pump holder (120mm fan hole pattern)
- Y-cable splitter: EK-Cable Y-Splitter 3-Fan PWM (10cm)
- ATX bridging plug

NOTE: The only thing not included is distilled water which must be purchased separately. 1L is enough for this kit.

<- Takaisin Näytä ilman ALV:tä    Vihjaa tästä    

Alphacool Ultra Pure Water - 1L Alphacool Ultra Pure Water - 1L
Double-distilled water - not electrically conductive!
6.70 €
Filling bottle - 500ml Filling bottle - 500ml
Sharp bottle in soft plastic, so you can easily and accurately fill and drain your system!
5.40 €
Funnel - White Funnel - White
If you don?t like water all over the place.
2.00 €
EKWB EK-CryoFuel - Clear - 1L EKWB EK-CryoFuel - Clear - 1L
900 ml of ready fluid - ready to pour into the system!
Contains everything your water cooling system requires!
7.95 €

Näytä ostoskori

0 tuotteet ostoskorissa 
Yhteensä 0.00 €

Rahti ja toimitus